Hydraulic Load Sensing & Control Devices

In order to direct the oil flow from the hydraulic pump to the equipment to be driven, load sensing and control devices, which are built up in modular construction segments, are used. These ensure the correct speed and sense of rotation of the equipment to be driven. Supplied as standard for 24 Volt electric installations, 12 Volt on request.
HT1011

HT1011

Single step load sensing device (24 Volt). Gives zero or full flow rate, depending on whether a load is sensed or not. Used for e.g. bow and stern thrusters. Includes electrical connection box.
HT1012

HT1012

Dual step load sensing device (24 Volt). Gives zero, partial or full flow rate, dependent on load sensed. Used for e.g. bow and stern thrusters. Includes electrical connection box.
HT1013

HT1013

Solenoid control unit (24 Volt) for bow and stern thrusters.
(12V available special order).
HT1014

HT1014

Solenoid control unit (24 Volt) with counterbalance, for e.g. mast lowering, hinged radar support (or any other hydraulic cylinder for numerous applications).
HT1024

HT1024

Solenoid control unit (24 Volt) for use with a set of stabilisers.
HT102311

HT102311

Control unit for anchor winches, capstans and other applications which are driven by a hydromotor with a flow rate of up to 60 litres/minute. Pressure and oil flow separately adjustable.
(12V available special order).
HT1023SHT102311

HT102312

Control unit for anchor winches, capstans and other applications which are driven by a hydromotor with a flow rate of up to 60 litres/minute. Only the oil flow is adjustable.
(12V available special order).
HT1019

HT1019

Solenoid control unit (24 Volt) for use with a hydraulically powered steering system or an automatic pilot.
HT1026

HT1026

An extension of the basic manifold block. Required if more than 5 solenoid control devices are installed. Includes additional electrical connection box.
HT1032

HT1032

Proportional valve assemblies. HT1032 for one thruster. These valves can be mounted on a HT1010 tank.
HT1035

HT1035

Proportional valve assemblies. HT1035 for two thrusters or a thruster and a windlass. These valves can be mounted on a HT1010 tank.

BRITISH MARINE LOGO PROUD MEMBER TAG WHITE RGB

United Marine Services are proud members of The British Marine Federation, you can find us listed here.

iso 9001

ums

6 Hythe Marine Park,
Shore Road,
Hythe,
Southampton,
United Kingdom.
SO45 6HE
TEL: 02380 846222